Welcome to W & S Supply Co. | Telephone: (201) 791-1691

Search results for '20" 3/8 72 .062'

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction
  1. Ingersoll Rand G1A200RH63 - 3 Inch Wheel Diameter, 20,000 RPM, Air Angle and Disc Grinder

    Ingersoll Rand G1A200RH63 - 3 Inch Wheel Diameter, 20,000 RPM, Air Angle and Disc Grinder

    $459.59
    Ingersoll Rand G1A200RH63 - 3 Inch Wheel Diameter, 20,000 RPM, Air Angle and Disc Grinder: This is a cut off wheel tool designed for use with type 1 wheels. It comes equipped with a 3/8"-24 spindle and 3" guard. Ultra rugged construction allows for continous use in production environments. Powerful 0.4 horse power motor means you will get the job done faster. Ergonomic composite handle provides increased operator comfort, reduced cold transfer, and greater worker productivity. Learn More
  2. Chicago Pneumatic CP6300-RSR - Impact Wrench

    Chicago Pneumatic CP6300-RSR - Impact Wrench

    $239.68
    Chicago Pneumatic CP6300-RSR - Impact Wrench: 3/8" Heavy-duty impact wrench Powerful single dog clutch perfect control with 4-position regulator Aluminum body and steel clutch housing Rubber grip and teasing trigger Learn More
  3. Dynabrade 52430 - 4" (102 mm) Dia. 7 Degree Offset Cut-Off Wheel Tool

    Dynabrade 52430 - 4" (102 mm) Dia. 7 Degree Offset Cut-Off Wheel Tool

    $351.86
    Dynabrade 52430 - 4" (102 mm) Dia. 7 Degree Offset Cut-Off Wheel Tool: .7 hp, 15,000 RPM, Front Exhaust, 3/8"-24 Spindle Thread Learn More
  4. STIHL 3639-005-0081 - 20" Chaisaw Chain Loop

    STIHL 3639-005-0081 - 20" Chaisaw Chain Loop

    $29.51
    STIHL 3639-005-0081 - 20" Chaisaw Chain Loop : (26RS 81 Drive Links) Stihl saw chain is made for the most demanding cutting conditions and is loaded with professional features. Stihl chain has Oilomatic drive link lubrication slots, which funnels oil directly to the rivet to reduce wear. Stihl chain is also pre-stretched at the factory, which helps eliminate excess adjustments during break in periods. 26RS is part of the Stihl Rapid Super series. 26RS is a fast cutting chisel chain which work best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. This chain has no significant kickback reduction features (See warnings below), but does has the added benefit of lower vibration levels as compared to the older style 26RS chain. It is recommended for professional use only. Learn More
  5. Ingersoll Rand 320AC4A - Air Die Grndr, Rt Ang, 20krpm, 0.4 HP, 32cfm

    Ingersoll Rand 320AC4A - Air Die Grndr, Rt Ang, 20krpm, 0.4 HP, 32cfm

    $265.42
    Ingersoll Rand 320AC4A - Air Die Grndr, Rt Ang, 20krpm, 0.4 HP, 32cfm: Air Die Grinder, Duty Industrial, Grinder Type Right Angle, Free Speed 20, 000 rpm, Average CFM @ 15 Second Run Time 8.00, CFM @ Full Load 32.0, Min. Hose Size 3/8 In., HP 0.4, Exhaust Rear, Collet 1/4 In. and 6mm, Handle Material Composite, Variable Speed No, Overall Length 6-23/32 In., Right Angle Length 2-5/8 In., Required Pressure 90 psi, Air Inlet 1/4 In. NPT, Bearing Type BALL, Throttle Lever, Includes Collet Wrenches Learn More
  6. STIHL 3623-005-0072 - 20'' Chainsaw Chain Loop

    STIHL 3623-005-0072 - 20'' Chainsaw Chain Loop

    $29.17
    STIHL 3623-005-0072 - 20'' Chainsaw Chain Loop : (33Rs 72 Drive Links) Learn More
  7. Chicago Pneumatic CP8272-D - 3/4 " Air Impact Wrench

    Chicago Pneumatic CP8272-D - 3/4 " Air Impact Wrench

    $479.12
    Chicago Pneumatic CP8272-D - 3/4 " Air Impact Wrench: Air Impact Wrench, Industrial Duty, Standard Anvil, Square Drive Size 3/4 In., Max. Bolt Capacity 1 In., Torque Range 184 to 922 ft.-lb., Max. Torque 1217 ft.-lb., 9.50 Average CFM @ 15 Second Run Time, 38.0 CFM @ Full Load, Free Speed 6500 rpm, 1000 Blows per Minute, Retainer Type Ring/Thru Hole, Style Pistol Grip, Required Pressure 90 psi, Air Inlet 3/8 In. NPT, Min. Hose Size 3/8 In., Overall Length 9-1/8 In., Handle Material Composite, Handle Type Pistol Grip, Housing Material Composite Learn More
  8. Ingersoll Rand 1207MAX-D3 - 3/8" Drive Air Ratchet

    Ingersoll Rand 1207MAX-D3 - 3/8" Drive Air Ratchet

    $149.71
    Ingersoll Rand 1207MAX-D3 - 3/8" Drive Air Ratchet: Air ratchet combines best in class performance nad a full complement of premium feautres to five professional technicians MAX Power (65ft-lb), MAX Control, and MAX Comfort Learn More
  9. STIHL 3003-008-6821 - 20" Rollomatic E Laminated Chain Saw

    STIHL 3003-008-6821 - 20" Rollomatic E Laminated Chain Saw

    $41.73
    STIHL 3003-008-6821 - 20" Rollomatic E Laminated Chain Saw: Rollomatic E laminated guide bar is 20-inches long. It is a three part (spot welded) laminated guide bar made of high grade steel with star shaped sprocket. It is an all around bar suitable for occasional, mid range, or professional users. Learn More
  10. Chicago Pneumatic CP796 -  1-Inch Super Duty Air Impact Wrench

    Chicago Pneumatic CP796 - 1-Inch Super Duty Air Impact Wrench

    $2,090.22
    Chicago Pneumatic CP796 - 1-Inch Super Duty Air Impact Wrench: Air Impact Wrench, General Duty, Standard Anvil, Square Drive Size 1 In., Max. Bolt Capacity 1-3/8 In., Torque Range 300 to 1400 ft.-lb., Max. Torque 2000 ft.-lb., 13.00 Average CFM @ 15 Second Run Time, 52.0 CFM @ Full Load, Free Speed 4100 rpm, 900 Blows per Minute, Retainer Type Hog Ring, Style Pistol Grip, Required Pressure 90 psi, Air Inlet 1/2 In. NPT, Min. Hose Size 1/2 In., Overall Length 9-1/2 In., Handle Material Aluminum Cast, Handle Type Pistol Grip, Housing Material Steel Learn More

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction