Welcome to W & S Supply Co. | Telephone: (201) 791-1691

Manufacturer

5 Item(s)

per page

Set Descending Direction
  1. Dynabrade 14306 - Dynangle II Abrasive Belt Tool, Dual Motor w/Platen

    Dynabrade 14306 - Dynangle II Abrasive Belt Tool, Dual Motor w/Platen

    $2,369.48
    Dynabrade 14306 - Dynangle II Abrasive Belt Tool, Dual Motor w/Platen: 2.4 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2" W x 45" L (51 mm x 1143 mm) Belts Learn More
  2. Chicago Pneumatic CP796 -  1-Inch Super Duty Air Impact Wrench

    Chicago Pneumatic CP796 - 1-Inch Super Duty Air Impact Wrench

    $2,090.22
    Chicago Pneumatic CP796 - 1-Inch Super Duty Air Impact Wrench: Air Impact Wrench, General Duty, Standard Anvil, Square Drive Size 1 In., Max. Bolt Capacity 1-3/8 In., Torque Range 300 to 1400 ft.-lb., Max. Torque 2000 ft.-lb., 13.00 Average CFM @ 15 Second Run Time, 52.0 CFM @ Full Load, Free Speed 4100 rpm, 900 Blows per Minute, Retainer Type Hog Ring, Style Pistol Grip, Required Pressure 90 psi, Air Inlet 1/2 In. NPT, Min. Hose Size 1/2 In., Overall Length 9-1/2 In., Handle Material Aluminum Cast, Handle Type Pistol Grip, Housing Material Steel Learn More
  3. Ingersoll Rand 2925B2TI - Impact Wrench | 1? Drive | 1,600 Ft. Lbs. | Rear Grip

    Ingersoll Rand 2925B2TI - Impact Wrench | 1? Drive | 1,600 Ft. Lbs. | Rear Grip

    $2,389.23
    Ingersoll Rand 2925B2TI - Impact Wrench | 1? Drive | 1,600 Ft. Lbs. | Rear Grip: Titanium hammer case, Corrode-X package (anti-corrosion),Twin Hammer mechanism, pressure fed lubrication mechanism, integrated muffler, 3/8" NPT air inlet Learn More
  4. Baldor 1216W - 12" Grinder 3hp, 1500/1800 rpm 3PH

    Baldor 1216W - 12" Grinder 3hp, 1500/1800 rpm 3PH

    $2,125.18
    Baldor 1216W - 12" Grinder 3hp, 1500/1800 rpm 3PH: 3HP, 1500/1800RPM, 3PH, 50/60HZ, 3628M, GRND, Grinder & Buffer 12 Inch Grinders. Cast iron tool rests & exhaust type wheel guards. Manual starter with overload protection. Also includes lighted eyeshield (bulb not included). All three-phase units are suitable for 50/60 Hz, 1500/1800 RPM operation Learn More
  5. Ingersoll Rand 2934A2 - Super Duty Impact Wrench

    Ingersoll Rand 2934A2 - Super Duty Impact Wrench

    $2,799.60
    Ingersoll Rand 2934A2 - Super Duty Impact Wrench: 1" square 1500 ft-lb D-St Handle SprDty Impact Wrench, 5300 rpm Learn More

5 Item(s)

per page

Set Descending Direction